Hurricane shutters made out of wood are the most common shutters you will find in the shutter market today. They are easily affordable and provide protection from the fury of the deadly hurricane. Wooden hurricane shutter come in a variety of patterns. And they can be easily built at home too. But if this shutter is your choice, then you must take all care to maintain it properly. During the past few years, aluminum has emerged as the ideal replacement for wood shutters. Though wooden hurricane shutter is the most common hurricane shutter in the market, it lasts long only if maintained properly. It is evident that though costing less initially, in the long run, wood shutters extract a lot as maintenance charges if neglected. They are available in all colors. Recent developments to enhance the look of this shutter that many homeowners are implementing these days are to add shutter hardware. This hardware has evolved over the years into stylish shutter accessories. It is available in many styles and finishes. For example the shutter dogs – this piece of hardware keeps the shutters open and attached to your house. And then you have the ring pulls that make it easy to close the wooden hurricane shutter from the inside of the house. Finally you have the side bolts that lock your shutters when they are closed. All these accessories make the shutter look beautiful and a wonderful addition to the façade of your house. You can also make this shutter at home. Let us look at the process: Wooden hurricane shutter built with plywood is a very affordable option for those who do not want to go in for professionally built shutter. To build a wooden hurricane shutter at home, take plywood planks or panels that are at least half-an-inch in thickness. Now cut them out to fit the window size. Screw barrel bolt at regular intervals. The barrel bolts can be three or four-inch heavy-duty barrel bolts. For a small or medium shutter, you can do with four-barrel bolts. Bigger wooden hurricane shutter will need more barrel bolts. Drill holes into the windowsill sides. Bolt up when needed. Otherwise store the shutters in a dry place. Never wait for hurricane warnings and then start to build wooden hurricane shutter.



Now place the plywood up against the window, and mark where each barrel bolt slides up against the wall. Once you've made all the marks, remove the panel and drill the boltholes into the concrete. If you need to place the panels on the outside exterior wall then instead of cutting the plywood to fit inside the window inset, it should be cut to leave at least four inches around the opening. Make necessary adjustments. Bolt up when needed. Otherwise store the shutters in a dry place. Never wait for hurricane warnings and then start to build this shutter. If you had skipped to build this shutter during the initial stages, do not wait for any special occasion. Build hurricane shutter NOW!