In event of a disaster, you will save damage to your house if you make hurricane shutter. There has been a rise in the occurrence of hurricanes in the recent past in certain parts of the world. Getting prepared to handle the adverse situation is the need of the hour. The intensity of the wind and storm would be difficult to predict although meteorological department has been successful in predicting the occurrence of hurricane. The residents would still have difficulty in responding to the storm even though they know the storm would strike. Evacuating the place is one of the options during the occurrence of the storm but not a solution. People who run frantically during the hurricane should try to know how to protect from the dangers of the storm. The high intensity winds and storms could damage the property or building to a great extent. Hurricane shutters are the perfect solution to prevent from the destruction of the storm and it is easy to make hurricane shutter. They are available in various forms and sizes and the mostly used one is the plywood hurricane shutter. Although they cannot with stand the high winds but due to economic considerations it is widely used. You can make hurricane shutter on own it can be installed on windows, doors and other openings of the building. To make hurricane shutter is not difficult, but you should carefully read the instructions before doing so. Since the commercial shutters are expensive most people make hurricane shutter with plywood as they take minimal time. Precaution should be taken to fasten it properly as it cause more damage to the window. To make hurricane shutter the most adopted method is cut the board to overlap over the opening and using tapping screws through wood fastened to the lead sleeve in the wall. To make hurricane shutter in less time is to overlap the opening and attach to the structure. But then, this the less efficient method adopted by many people than what is required for protection. Although to make hurricane shutter it would require special skill but the above methods are used as disaster or last minute preparation if you don’t have any shutter installed before the occurrence of the hurricane





Most people make hurricane shutter with special kind of plywood that is easy to install and cost effective. There are various types of hurricane shutters that cannot be prepared by an individual easily and are also expensive. To make hurricane shutter by an individual himself the number is growing and one can add to the list. Different people make hurricane shutter in various methods according to the knowledge they have but one should make sure make hurricane shutter does not cause harm rather than doing good. Hurricane shutters are fitted for brick homes and commercial buildings and the method of installation varies from one another. To make hurricane shutter on own would have to comply with the standards and should be of high quality. To make hurricane shutter you also need bolts, anchors, wood, large washers and fine quality plywood. Install the shutters when you have read the instructions of manual thoroughly.